I have plugged in the NEO 2.0 and all seems to work fine. I have noticed that my ARC does not work any more as i have an AV Amp that used to ouput my audio from built in apps and USB media..
How ca i get the NEO to pass through the ARC/EARC from my TV to my AMP?
I use digital optical out plugged from my tv to av receiver if your tv supports digital/optical sound. You’ll have to set your avr and tv to dig/opti option.
Thanks for sharing. I believe it would be helpful:)
is not that helpfull because the audio quality is way worse on optical
@jigsawpr I agree 100! Optical is old tech and limited to nowadays I call... Basic...
I have the following set up with my LG c9 oled and I am interested in getting this led light kit. But I am worried about signal loss (both audio DOLBY ATMOS and video DOLBY VISION). What is the best way to prevent any potential loss when connecting my system to the Neo HDMI 2.0 kit?
TV <--HDMI ARC-->SOUND BAR
SOUND BAR <--HDMI--> PS4
SOUND BAR <--HDMI--> XBOX SERIES X
SOUND BAR <--HDMI--> Nintendo SWITCH oled
In this case, where do I connect the HDMI kit?
Hi there,
I am afraid Neo cannot support ARC/eARC. It can support AVR. I have attached the possible connection methods for you. Hope it helps.
@Lytmi looking at diagram # 3. Assuming you would connect the control box to a second monitor output on the AVR? Wouldn’t that also remedy any signal restrictions ie 120 refresh along with ARC support as the TV is still directly connected to the AVR?
to Lytmi support
Is it correct that the splitter which You added for Dolby Vision does not support eARC ? I try to receive the sound from TV on my AV-receiver Denon but nothing through the splitter
@Igor I fixed all my issues and the eArc with this and works perfect!!
Feintech VSP01222 hdmi splitter
https://www.amazon.co.uk/dp/B08KFD4XGK/ref=cm_sw_r_awdo_RCC9ZSTQSMF812S6GC5V
Input 1 from AV receiver Output 1 to TV Arc Output 2 to Lytmi Neo box (No output from Lytmi Neo to TV needed) Job done!
@Chirag Patel waiting for reply please
@Igor please see the specs for the splitter. Yes supports Dolby vision.
I did not use any spliiters from Lytmi as they don't support the arc function.
Thus do not You use the splitter from Lytmy? Have You got Dolby Vision picture in TV in this case ? Did You check up the availability of DV on TV ?
How did You connect the devices? Show it for the scheme or photo please
Have You got the splitter from Lytmi ( as additional box for Dolby vision) ?