Hello, I have a problem with the fixing of the led strips: the adhesive regularly comes off the clips. Have you ever encountered this type of problem? How did you solve it? I would like to print with a 3D printer the clips (corners and length / width) are the models available? otherwise, would you have the technical diagram with the quotations?
thank you in advance for your help
Finally, I opted for in-house manufacturing: I modeled 2 parts which were glued with double-sided tape https://www.amazon.fr/gp/product/B01M5H1LNB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Lytmi Support Angle.png (Green) in 4 copies to position at the 4 corners of the TV
Lytmi Support.png (Purple) in 15 copies 5 on top 3 on each side and 4 on bottom
I printed them with my 3d printer, if someone want the STL files tell me.
@Eric FREGER thanks for sharing, hopefully the solvest my issues
Same for me I heard something fall, couldn’t find it and then when I turned on my tv…..I re attached them but they now sag. They are just too heavy and need more brackets.
There are also some links, maybe it can help: https://www.amazon.com/Command-Clear-Clips-Strips-CL017-13NA/dp/B076ZT3FVN/ref=sr_1_9?keywords=TV+strip+light+holder&qid=1640338957&sr=8-9 https://www.amazon.com/Blulu-Pieces-Outdoor-Adhesive-Decoration/dp/B0816DZ2YL/ref=sr_1_31_sspa?crid=1MNEKTHY7VT0C&keywords=Strip+Light+Mounting+Clips&qid=1640339052&sprefix=tv+strip+light+holder%2Caps%2C376&sr=8-31-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySlpNR1pDWjhQSUZEJmVuY3J5cHRlZElkPUEwNDY5NjUxUFRUSUVOVjMxTTZMJmVuY3J5cHRlZEFkSWQ9QTAzNTM2MjcxR1hBVVNEMzVNRkFaJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
I had the same problem. I removed the adhesive pads that came with the mounts that kept falling off and replaced them with heavy duty mounting velcro. They seem to be holding up for now.
Hello, you can use a hot glue gun, in my experience it works very well to anchor the led strip to the tv.
https://m.media-amazon.com/images/I/81PRBcJG+JL._AC_SL1500_.jpg