Where can I get a new LED Strip?

Provate le ws2811 da btf-lighting sono simili,differisce colore rbg

Salve ho problema sui colori invece di vedere rosso laterale verde superiore,blu laterale ho il blu superiore,anche cambiando da applicazione il senso di rotazione sono sfalsati , c'è una soluzione?

Hi I have a problem with the colors instead of seeing lateral red upper green, lateral blue I have the upper blue, even when changing from application the direction of rotation is offset, is there a solution?

So hallo @all, i solved the problem with the following parts and it works perfekt with the NEO

WS2812 ECO 5M 300 LEDs RGB... https://www.amazon.de/dp/B088FK8NG6?ref=ppx_pop_mob_ap_share

JZK Power Step-down Transformer... https://www.amazon.de/dp/B06XSCCLCD?ref=ppx_pop_mob_ap_share

The 5m strip it’s enough for 55-65 tv

Yeah thats possible. But it is hard to find addressable led strips with 12V and 60 LED per metre with a different RGB order. Especially if the seller dont give any information about that.

I believe what’s happening is , you are using light strip with different RGB color order than Light Mi strips. You can get light strips in BRG,GBR..etc configurations depending on manufacturer. Normally addressable light strip controllers have settings in them to compensate for different order and show right Colors. If you can find what RGB order Light Mi strips are, probably can use different strips on Neo controller.

Hi, still tested. and it’s not working properly. Blue and green ist switched.

I think it was D- 🤔. But I definitely tried both, D- and D+. With one of them the LEDs where only white (so no data input for the color), with the other pin colors could be displayed, but like I mentioned with wrong colors.

Please tell us if the one you posted do work correctly. That would be nice to know!

Do you use Pin D+ for Data out? I think i‘m going to Order the led stripe from my link and try it out.

I am not quiet sure. The one of your link looks almost identically to the original. But I dont want to test x amount of strips just to see if they work or not because you have to cut of the connector which makes it impossible to get your money back if they dont work.

Thats why I brought new strips directly via email, just like Lytmi recommends. Thats $35 + $10 shipping to germany for the 66-90 inch version. Now I can be sure that they will work correctly.

Maby this could be the right? I don´t now

https://www.amazon.de/BTF-LIGHTING-300LEDs-Schwarz-Streifen-NichtWasserdicht/dp/B01CNL6K52/ref=asc_df_B01CNL6K52/?tag=googshopde-21&linkCode=df0&hvadid=232051979945&hvpos=&hvnetw=g&hvrand=6841923788213121190&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1003938&hvtargid=pla-408656678064&th=1

Hi,

yes the strip in the picture is the one I brought afterwards, not the original. I was just wondering why they don't display the correct color.

I just sent an email to the provides address. Thank you for your help!

Hi there,

I am afraid the LED strips in your provided pics are not the original one from Lytmi. And the separated LED strips links have not been on our website yet.

Sure you could purchase the LED strips individually. We now have 2 sizes available： 66-90 inch and 91-120 inch. The price for 66-90 inch is $35, for 91-120 inch is $40.(Shipping fees not included)

You could contact us via emai for the further purchasing: support@light-mi.com

Not yet... the one I brought (the one in the picture) looks almost identically to the original. But like I said, the colors dont match.

Any solutions yet? I also have to extend the led for my beamer wall.

Is there some type compatible with this box?

Looks like it is WS2811 strip.